Easy parameter
setting

 

Working chamber
of the
SWMPerformance
  Camera installation
for an external
monitor/display

Laser Welding

Manual Laser Welding

ROFIN has developed the first manual laser welder in 1992 and has installed more than 4,000 lasers in this market. The very special properties of the manual welding systems have revolutionized the manufacturing and repair work of jewelry. The parts are positioned in a working chamber and viewed through a binocular with magnification and crosshair. Positioning and joining of the objects are done by hand of the operator and with a laser-spot. This means, no costly fixtures have to be made and no time consuming binding with steel wire has to be done to assemble parts.

Weld anything - anywhere!
Laser welding allows platinum, gold, silver, stainless steel and titanium (and many other alloys) to be joined together without the use of solder. A laser weld is strong and pure also in areas where it would be hard to gain access for other joining techniques. In general, if you can see the joint - you can laser weld it.

Repair times reduced
Whether the task is eliminating porosity of platinum castings or repair of damaged claws, ring sizing or repairing prongs, the laser is an essential tool to provide strong and invisible repairs of the highest quality in the shortest time. Watches, spectacles, bracelets, rings, necklaces – all of these can be returned to perfection using the fine focus of the laser beam.

Only the best material
By welding precious metals together without filler material or solder, it is possible to get high strength and avoid the impurities of potentially toxic alloys. In dental manufacturing or maxillofacial restructuring, the laser allows custom designed supports to be joined permanently without distortion.
 
     
Performance
The bestselling manual laser welding unit worldwide! More than 4,000 customers use this system for fine-welding stainless steel, titanium, gold or platinum. With this tool they create seam welds under 100 microns and work with materials as thin as 10 microns or wires of 20 microns in diameter. Learning to operate this system is a matter of hours.

     

Select
The Select is a fully integrated system: ergonomically optimized manual welding laser, joystick controlled deposit welding system or high-precision CNC system – a unique welding concept with four high-precision axes, short setup times and easy CNC programming.

     

Desktop
The Manual Desktop is the smallest and most cost-efficient model of the successful manual welding series. A compact, low-cost and multi-purpose manual welding laser. The laser achieves excellent results in the precise welding of electronic components, in precision mechanics as well as in the design and repair work of jewelry and also in the production and repair of crowns and bridges in dental industry.

     
StarWeld 20/40/90
The new StarWeld 20/40/90 has a compact enclosure that can be conveniently installed under a desk. The StarWeld 20/40/90 produces high-quality and consistent spot and seam welds on metals and alloys, including precious metals, even under difficult process conditions, due to the individually adjustable pulse shapes. It is the ideal system for the electronics, electro-mechanical, opto-electronics, sensor, medical device and jewelry industries.