ROFIN / Baasel Lasertech presents the new StarCut Tube -
a high precision laser cutting system for cutting medical
implants like stents or other precision components. State-of-the-art
technology allows cutting a coronary stent of 8 mm length
in less than 1 minute.
Today, after several hundred successfully installed
systems, the fifth generation of StarCut Tube operates up
to ten times faster than the original launch.
The basis for the enormous increase
in productivity is the state-of-the-art motion system based
on linear motor technology and direct drive rotary axis.
The sophisticated control unit of the laser adjusts all
performance parameters of the laser source optimally
to the travel speed of the motion system. Even smallest
radii pose no problem. The actual contour trajectory
can be viewed on the large TFT monitor at any time. With
the proven massive granite set-up, a maximum accuracy
of only a few microns can be achieved - with high long
term stability.
rod- or fiber laser - choose
between several available sources
wet an dry cutting
all-in-one system
fast - less than 1 minute
for cutting a
coronary stent of 8 mm length
state-of-the-art motion systems - linear
motor technology and direct drive rotary axis
accurate - granite set-up for a maximum
accuracy of only a few microns can
automatic tube loading
stereo microscope , large TFT screen,
camera as an option
process gases with a pressure of max.
25 bar
4 axis version optionally, allowing
non-radial cuts,
cutting support box for flat sheet
components
